Drop a magnet through different tubes to see eddy currents brake it, then switch a coil on and off to measure its back-EMF.
| Trial | Tube | Magnet | Drop time (s) | Top speed (m/s) |
|---|---|---|---|---|
| Finish a drop, then press Record. Compare all four tubes. | ||||
The falling magnet changes the flux through rings of the metal tube. This induces eddy currents that circulate in the metal. By Lenz’s law their fields oppose the motion: the ring above attracts the magnet and the ring below repels it.
k is bigger for a better conductor and a stronger magnet. A slot cuts the eddy current loops.
| Trial | V (V) | R (Ω) | L (H) | Final I (A) | Time constant (s) | Peak back-EMF on opening (V) |
|---|---|---|---|---|---|---|
| Close the switch, wait, open it, then press Record. | ||||||
The changing current in the coil changes its own flux, so the coil induces an EMF that opposes the change. Closing: the current grows slowly. Opening: the current tries to stop suddenly and a very large back-EMF lights the neon lamp (needs about 80 V).
1. ΔI = Ifinal − Iinitial
2. Rate = ΔI / Δt
3. |EMF| = L · |ΔI| / Δt
4. Lenz: the EMF opposes the change in current.