Thomson Tube Lab | Physics with Atta
← Physics with Atta

Thomson Tube Lab

Balance the electric and magnetic forces on an electron beam, then switch off the electric field and use the radius of the circular path to find the charge-to-mass ratio, as J.J. Thomson did.

Thomson's tube: electron beam between charged plates and a magnetic field
Electric force qE–
Magnetic force qvB–
Balance speed v = E/B–
Radius r = mv/(qB)–
–

Thomson's method in 3 steps

1. Fields both on: adjust until the beam is straight → Bqv = Eq → v = E/B
2. Turn the electric field off: the beam follows a circle → Bqv = mv²/r
3. Charge-to-mass ratio: q/m = v/(Br)    Measured q/m: –

Controls

Trials recorded: 0 (see the Record tab)

Your tasks

  1. Set v = 2.0 × 10⁷ m/s and B = 3.5 mT. Find the E that makes the beam go straight (or press Balance it).
  2. Switch to B only. Read the radius. Check it with r = mv/(qB) (Example Problem 3: r ≈ 3.2 cm).
  3. Use q/m = v/(Br) to find q/m. Compare with 1.76 × 10¹¹ C/kg.
  4. In E only, which plate does the beam bend toward? Why?

Directions

Top plate is positive, so the electric force pushes the electron up. The magnetic field points into the screen (×); for a moving electron the magnetic force is down. Electron: q = 1.602 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg.